Fiber harp data with lattice and input configured as per commissioning run. But with nominal kicker voltage of 55kV

harp/configuration6-nk/ contains all of the input and output data
harp/configuration6-nk/list.dat includes all subdirectory runs compiled for harp plots
harp/configuration6-nk/FiberHarp.dat is harp data file

Basic parameters of simulation - Configuration "6"

(100 k muons) X 8 runs - injected through backleg iron, inflector, kicker into ring.
Create phase space with parameters as per config 6
Muon decay = F
No Scattering of injected beam in inflector ends and quad 1
Scattering in fibers = T
Quad voltage 12-19kV with ramp
Field errors (see input.dat)
beginning[beta_a] = 37.4 ! measured Joe Bradley and Diktys July 2017
beginning[beta_b] = 2.16
beginning[alpha_a] = 9.57
beginning[alpha_b] = 2.06
beginning[eta_x] = 0.5 !Diktys's guess
epsx = 22.7
epsy=16.6
kicker_field = 290.e-4 290.e-4 290.e-4 ! Kick strength (Tesla) (55.,55.,55. kV)

Lattice and initialization details are here

Output

The file harp_plane_hits_all.dat List of hits in each harp plane
The file FiberHarp-001.25ns.dat holds moments evaluated in 1.25ns intervals and FFT of moments
The file FiberHarp-010.00ns.dat holds moments evaluated in 10ns intervals and FFT of moments
The file FiberHarp-150.00ns.dat holds moments evaluated in 150ns intervals and FFT of moments
The file FiberHarp-001.25ns.dat_central_fib holds first and second moments and FFT of moments in 1.25 ns bins - central fiber

list.dat all files used to generate FiberHarp.dat

Position and width - 150 ns time bin
Harp 1 - Vertical Position	Harp 1 - Vertical width
Harp 2 - Horizontal Position	Harp 2 - Horizontal width
Harp 3 - Vertical Position	Harp 3 - Vertical width
Harp 4 - Horizontal Position	Harp 4 - Horizontal width