Configuration 4 - with harps - commissioning run
Fiber harp data with lattice and input configured as per commissioning run, quads 10-17kV scraping
Basic parameters of simulation - Configuration "4"
- (50 k muons) X 20 runs - injected through backleg iron, inflector, kicker into ring.
- Create phase space with parameters as per config 1
- Muon decay = F
- No Scattering of injected beam in inflector ends and quad 1
- Scattering in fibers = T
- Quad voltage 10-17kV scraping
- Field errors (see input.dat)
- beginning[beta_a] = 37.4 ! measured Joe Bradley and Diktys July 2017
- beginning[beta_b] = 2.16
- beginning[alpha_a] = 9.57
- beginning[alpha_b] = 2.06
- beginning[eta_x] = 0.5 !Diktys's guess
- epsx = 22.7
- epsy=16.6
- kicker_field 150.3e-4 254.7e-4 211.4e-4 ! Kick strength (Tesla) for 989 kick 1.27m kickers (28.4,48.3,40.1 kV)
- kicker delay 0ns
Lattice and initialization details are here
Output
These files are hits in <-> time bins, on each fiber in each plane and fft
Fiber-001.25ns.dat holds fiber hits in 1.25ns intervals and FFT
Fiber-010.00ns.dat holds fiber hits in 10ns intervals and FFT
Fiber-015.00ns.dat holds fiber hits in 15ns intervals and FFT
Fiber-150.00ns.dat holds fiber hits in 150ns intervals and FFT
Energy and Time Distribution at End of Tracking